2AD132C-B05LB3-CS03-A2N1

Product Description

The 2AD132C-B05LB3-CS03-A2N1 Bosch Rexroth asynchronous AC motor cannot be used without a supporting drive controller. This motor belongs to the 2AD series of such offerings by the manufacturer. The product has no shaft seal on the output shaft. This device must be used only by people who are trained and qualified to operate it. The unit has live connection points when it is in use. Its faulty control can trigger dangerous drive controller movements. This motor should be cooled down before working on it after it has been operated.

The product features a force-actuated shaft-hub connection with zero backlash. This device encompasses bearings with a mechanical service life of 20,000 operating hours. The unit depicts reduced output when the ambient operating conditions are exceeded. Its feedback is characterized by high resolution. This motor cannot be operated without a blower connection. The product features a continuous standstill current until it reaches its derating speed. This device is equipped with the output shaft on Side A. The unit has standard electrical connections. Its output shaft has an IP 40 degree of protection.

This motor incorporates an NTC thermistor in its windings. The product can be connected with an air channel by using a blower support base. This device can be installed horizontally or vertically. The unit supports a maximum axial force of 30 N. It is associated with standard bearings to support its operation. This asynchronous AC motor uses a blower with an average air volume of 1000 m^3/h for the cooling action.