Product Description

The 2AD100D-B05OA1-AS03-D2N1 is a Rexroth 2AD Asynchronous motor that can also be used as a servo. This particular model has a motor size of 100 and a length size of D. The motor can be mounted using a flange mounting. This type of mounting allows the motor to be mounted rigidly and perpendicularly to a base that helps it reduce vibration. The motor’s power connector is mounted on the top allowing the users to connect it without any hassle.

The nominal speed of 2AD100D-B05OA1-AS03-D2N1 is around 1500 rpm which can go all the way up to 9000 rpm under heavy load conditions. To achieve the maximum speed it is recommended to use the standard bearings. To keep the motor cool, the 2AD100D-B05OA1-AS03-D2N1 features an Axial blower that throws the air outwards towards the back allowing the air to flow through the internals. The axial blower requires 230 Volts AC to operate. This motor has one drawback, it does not feature a holding brake like the other motors in the series for stopping the shaft when the motor does not have power.

The motor comes with a balanced key shaft that is sealed and prevents any kind of dust particles or moisture from getting in from the front. The motor is IP 65 rated while the axial blower is IP 24 rated which provides touch protection only. The motor has a noise level of 75 dB which is fairly quiet given that it also has an axial blower fan. The recommended ambient temperature of this motor is between 0 to 40 degrees Celsius with a Thermal time constant of 50 minutes before the motor starts to heat up.