Product Description

The Bosch 2AD100C-B05OR2-AS03 is an AC asynchronous servo motor. As per the product type code, the motor frame size is 100 and the frame length is C. Code for the motor winding is AS. Bosch has designed 2AD motors with forced-air cooling (surface cooling). This cooling method relies on fans or blowers that create increased air flow across the motor housing. Forced-air cooling enables motors to deliver higher levels or output power and torque. The axial blower on the motor requires 230 Volts AC input. Rated torque of the 2AD100C-B05OR2-AS03 motor is 35 Nm and its power output rating is 5.5 kilowatts. The motor is equipped with a flange for mounting. The flange is a plate attached to one end of the motor housing. Mounting holes on the flange allow secure mounting with the help of mounting screws. Size of the motor flange is 192 millimeters.

Diameter of each of the four mounting holes is 14 millimeters. Length of the 2AD100C-B05OR2-AS03 motor is 613 millimeters and its centering diameter is 130 millimeters. The motor shaft’s diameter is 32 millimeters. Around 60 millimeters of the shaft is available outside the main housing. The power connection on the motor is located on the top side of the housing. Protection class of this connection is IP65. The 2AD100C-B05OR2-AS03 motor supports high-performance motor feedback. The protection class of the feedback connection is IP65. Typical 2AD motor applications include packaging machines and printing machines. Two rating plates are attached to each 2AD motor. These plates list important and relevant information, including the type code and technical specifications. The preferred ambient temperature for 2AD motors is 0 to 45 degrees Celsius.