Product Description

2AD100C-B05OR1-AS03-B2N1 is a servo motor. It belongs to Bosch Rexroth’s 2AD series. These are asynchronous AC motor designed with forced air cooling. Operators can choose between radial and axial cooling. Furthermore, blowers rated for 115 and 230 Volts AC are available. The 2AD100C-B05OR1-AS03-B2N1 motor has an axial blower. This blower requires 230 Volts AC from an external power supply. Power consumption of the blower is 60 VA and its average air volume production is 230 m³/h. Different options are available for the motor shaft including plain shafts and shafts with key. Shaft seals are also available as an option. The 2AD100C-B05OR1-AS03-B2N1 motor has a shaft with key but without a shaft seal. This type of shaft that does not include a seal has IP40 protection rating. Electrical power for the motor is supplied by the motor controller.

The electrical connection is located on the top of the housing. This power connection is IP65 rated. The 2AD100C-B05OR1-AS03-B2N1 motor supports high-resolution feedback. The feedback connection on the motor is IP65 rated. Feedback allows precise control of motor speed and position. As a result, the motor can be used for applications that require high precision and accuracy. Bosch has designed the 2AD100C-B05OR1-AS03-B2N1 motor for flange mounting. Operators can order 2AD motors that support flange and foot mounting at the same time. The motor is equipped with standard bearings. It does not require maintenance. The ambient temperature required for optimal performance is 0 to 45 degrees Celsius. At higher temperatures the output derates, reaching 20% at 55 degrees Celsius. 2AD motor operation at temperatures higher than 55 degrees Celsius is not permitted. Trained professionals should install and operate the motor.