Product Description

2AD100C-B05OR1-AS03-A2N1 is a Bosch Rexroth 2AD series asynchronous motor. In contrast to synchronous motors whose shafts are synchronized to the frequency of input current, the speed of asynchronous motors is less than the synchronous speed. Base speed of the 2AD100C-B05OR1-AS03-A2N1 motor is 1500 RPM and its speed can go up to a maximum of 9000 RPM. Standard bearings are used for motor construction. The motor does not require maintenance, which reduces operating costs and improves productivity and therefore profitability. Reliable motor operation is dependent upon a number of factors that include the operation environment and the size of the power cable used. Ideal ambient conditions lead to rated output, whereas a non-ideal ambient conditions lead to derated output. The specified ambient conditions for 2AD motors include 0 to 1000 meters site elevation and 0 to 45 degrees Celsius ambient temperature.

The power cable used must be able to carry the required amount of current without overheating or catching fire. For the 2AD100C-B05OR1-AS03-A2N1 motor, Bosch recommends power cables with 4 mm² cross-sectional area. The servo motor has a plain shaft that does not include a seal. Protection category of the shaft is IP40. The motor – through its housing - is protected against contact with moving parts or parts to which voltage is applied. The motor is also protected against penetration by water and solid objects. Protection rating of the power connection and the feedback connection on the 2AD100C-B05OR1-AS03-A2N1 motor is IP65. Protection category of the motor blower is IP54. The 2AD100C-B05OR1-AS03-A2N1 comes with an axial blower rated for 230 Volts AC. Other motor features include high-resolution motor feedback and flange mounting. Professional installation is recommended for minimization of installation errors.