Product Description

2AD100C-B05OL7-AS03-A2N1 is a 2AD series asynchronous AC motor. Its manufacturer is Bosch Rexroth. Some of the 2AD motor applications are reshaping machines, packaging machines and printing machines. The motors support high-resolution feedback. The integrated sensor measures rotor position and sends this information to the drive, which regulates motor speed and rotor position. 2AD motors are available with flange or foot mounting. The 2AD100C-B05OL7-AS03-A2N1 motor is designed for flange mounting only. Size of the flange is 192 millimeters and it has mounting holes with 14 millimeters diameter. Performance specifications for the 2AD100C-B05OL7-AS03-A2N1 motor include 5.5 kilowatts rated power, 35 Nm rated torque, 27 Amps rated current, 168 Volts nominal voltage, 1500 RPM base speed and 9000 RPM maximum speed. Inertia of the motor rotor is 0.021 kg m2. 

Bosch recommends power cables with minimum 4 mm² cross-sectional area. Insulation class of the motor is F as per DIN VDE 0530. The radial blower installed on the 2AD100C-B05OL7-AS03-A2N1 motor requires 230 Volts AC and its power consumption is 60 VA. The blower is able to produce approximately 230 cubic meters per hour of airflow across the motor body. As a result, the motor housing dissipates heat effectively, enabling a lower internal temperature and better performance. The plain shaft is suited to friction-locked shaft to hub connections. A major benefit of plain shafts is a backlash-free connection and a high run quality. Operators can use pressure sleeves or tension sets to couple the shaft to belt discs, pinions or other drive elements. The motor shaft does not include a seal. Power connection is situated on the top of the housing and faces towards the left. The servo motor is equipped with standard bearings.