Product Description

2AD100C-B05OB2-AS03-B2N2 is a servo motor with high-resolution feedback that is designed for industrial use. Its manufacturer is Bosch Rexroth and it is part of the 2AD product line. The motor has a shaft with key but not a shaft seal. The key is balanced with a full key. The function of the key is to prevent relative rotation between the shaft and the connected machine. Therefore, the shaft with key ensures effective torque transfer. Diameter of the shaft is 32 millimeters. Length of the shaft that is outside the main housing is 60 millimeters. The motor centering diameter is 130 millimeters and its length is 582 millimeters. Operators can mount the motor by running screws through the mounting holes on the motor flange to secure it to a flat mounting surface. The size of the motor flange is 200 millimeters and the diameter of each hole is 14 millimeters.

2AD100C-B05OB2-AS03-B2N2 is motor that is designed for surface cooling. This cooling method uses fans or blowers to increase the airflow across the motor housing during operation. Bosch has installed an axial blower on the motor. Power supply requirement of the blower is 230 Volts AC and the power requirement is 60 VA. Airflow produced by the motor during operation is approximately 230 cubic meters per hour. Bosch has designed the 2AD100C-B05OB2-AS03-B2N2 motor so that it is able to handle a higher level of environmental vibrations. This feature makes the motor suitable for operating environments with a high level of vibrations. The ambient temperature required for rated output is 0 to 45 degrees Celsius. The ambient elevation required for rated output is 0 to 3300 feet.