Product Description

2AD100C-B05OB2-AS03-A2N1 is 2AD series Bosch Rexroth servo motor. Its nominal speed is 1500 RPM. However the motor can sustain a maximum speed of 9000 RPM. It is equipped with a smooth shaft that does not feature a seal. This shaft is suited to friction-locked shaft-hub connections. The higher run quality and the backlash-free connection between shaft and hub are a significant advantage of this recommended shaft design. Protection rating of the shaft is IP40. The protection rating of the power connection and the feedback connection is IP65. The motor is equipped with a blower that belongs to the IP54 category. This blower is mounted so that it produces airflow along the shaft’s axis of rotation. External power supply requirement of the blower is 230 Volts AC. Power requirement of the blower is 60 VA. Average airflow produced by it on an hourly basis is 230 cubic meters.

2AD motors are available in versions that support only flange mounting or both flange and foot mounting. The 2AD100C-B05OB2-AS03-A2N1 is designed for flange mounting. If the motor is installed vertically, operators must ensure that liquids do not run along the output shaft. This precaution is also valid for shafts equipped with protective seals. 2AD motors are equipped with life-time lubricated deep-groove ball and cylindrical roller bearings. The mechanical service life of the bearings equals 20,000 working hours; this specifications is valid if the radial loads and average speeds comply with values listed in the relevant product documentation. A factor that does affect bearing service life is lubricant consumption. The 2AD100C-B05OB2-AS03-A2N1 motor supports high-resolution feedback. Only trained and qualified professionals should install, operate and maintain the AC servo motor.