Product Description

2AD100C-B05OB2-AS03 is an asynchronous servo motor. It is designed by Bosch Rexroth. The motor belongs to the 2AD product line. Asynchronous motors are reliable, simple and cost-effective. The output speed and input current frequency are not synchronized. 2AD motors from Bosch do not require maintenance, which helps to reduce operating expenditure. The 2AD100C-B05OB2-AS03 motor supports high-resolution motor feedback, which measures rotor position and signals it to the drive. Rated power output of the motor is 5.5 kilowatts and its torque output is 35 Nm. The base speed and maximum speed are 1500 RPM and 9000 RPM respectively. The nominal current and voltage ratings are 27 Amps and 168 Volts. Average sound pressure produced by the working motor is 70 dB when measured at a distance of 1 meter.

The motor mass if 49 kilograms. It is designed for 0 to 45 degrees Celsius ambient temperature. An axial cooling fan is mounted onto the motor to increase airflow across the motor housing. This fan requires 230 Volts AC external power. Power requirement of the fan is 60 VA. The mount of hourly airflow produced by it is 230 m³. Centering diameter of the motor is 130 millimeter and its shaft diameter is 32 millimeters. Approximately 60 millimeters of the motor shaft are outside the main housing. Length of the 2AD100C-B05OB2-AS03 motor is approximately 582 millimeters. The motor flange size is 200 millimeters and the diameter of each mounting hole on the flange is 14 millimeters. The power connector is located on the top of the motor and points towards side B of the housing. 2AD motors support optional holding brakes; however this motor does not include the brake.