Product Description

The 2AD100C-B05OB1-AS23-D2N1/S003 asynchronous motor offered by Bosch Rexroth should have its plug-in connections firmly secured in place when the machine in which the installation is done is in operation. This motor has live connection points when is put into operation. The product-associated blower may rip off the housing if it is held for pickup. This device has to be switched off and secured against restart during maintenance and repair work. The unit handling has to be done by using suitable lifting equipment. It can neither be transported nor stored in a vertical orientation. This motor has high electrical voltage because of incorrect connections.

The product must incorporate protection against indirect contact in adherence to DIN EN 50178 specifications. This device tends to have electrical parts with voltages exceeding 50V when its utilization is being done. The unit supports the connection of only spare parts and accessories that have the approval of their manufacturer. Its surface becomes very hot during the operation phase. These motor-fitted plastic sleeves offer protection against mechanical damage and moisture. The product type plate on the housing must be visible without any hindrance all the time. This asynchronous motor encompasses backup support for one year.

The device uses a flexible cable with a 4mm² cross-section for the direct connection to the drive controller. This unit features no support for a labyrinth seal. Its protective conductor must be securely connected to the provided component points all the time. The motor can have undesirable consequences due to failure of following the safety instructions. This product operation is supposed to be executed only by people who have the required expertise to do so. The device adheres to 2006/95/EC low voltage directives. This unit is cUL-Recognized. Its operating instructions have to be read and understood prior to use. This asynchronous motor transportation is possible to any global location.