Product Description

The 2AD100C-B05OB1-AS23-D2N1 asynchronous motor is equipped with bearings that are lubricated throughout the lifetime. This Bosch Rexroth motor supports only very low axial loads. The product is not recommended for use with helical toothed output pinions. This device-associated holding brake should not be used in main spindle applications. The unit features the flow of an air stream over its surface through air baffles for cooling. Its power terminal comprises the connections for the holding brake as well as the NTC thermistor. This motor encompasses an NTC thermistor in its windings for its protection against overheating. The product houses the power terminal plus feedback connection on the same side.

This device-related blower features its own protective circuit connection. The unit requires an air channel connection for its cooler to conduct clean air when the operation takes place in a very dark environment. Its feedback has an absolute accuracy of +/-1.2’. This motor’s associated linear axes are held in a standstill with its holding brake. The product portrays a faster consumption of the lubricant of its bearings with non-conforming loads. This device operation has to be done such that the encountered forces are not more than the indicated limits. This asynchronous comprises a warranty tag for one year.

The motor fitted blower has an average air volume of 230m³/h. This unit has no support for the operation of its holding brake when it is deployed for main spindle applications. It is acceptable for the holding brake to get closed occasionally when there is a power failure. The product must undergo a periodic check for its blower functionality. This device houses a power connector that must be firmly secured in place after ensuring that it is in the final position. The unit-related connections can be connected and disconnected only when it is de-energized. This 2AD100C-B05OB1-AS23-D2N1 asynchronous motor transportation is done in custom military-grade packaging.