Product Description

2AD100C-B05OB1-AS21 is a servo motor rated for 1500 RPM nominal shaft speed. If required the shaft can reach speeds of up to 9000 RPM. The motor is equipped with an electrically-released holding brake. Holding torque rating of the brake is 24 Nm. The nominal terminal voltage is 24 Volts DC and the current consumption is 0.9 Amps. Release delay of the brake on the 2AD100C-B05OB1-AS21 motor is 100 milliseconds. The clamping delay of the holding brake is 60 milliseconds. Weight of the motor holding brake is approximately 1.5 kilograms. Weight of the 2AD100C-B05OB1-AS21 motor is approximately 49 kilograms. Centering diameter of the servo motor is 130 millimeters. Length of the motor housing is approximately 445 millimeters. The smooth motor shaft has a 32-milimeter diameter. Each side of the motor flange measures approximately 192 millimeters.

There are four mounting holes on the motor flange. Each of these holes has a diameter of 15 millimeters. The 2AD100C-B05OB1-AS21 motor cools via surface cooling. It is equipped with a axial cooling fan that runs on 230 Volts AC power. The blower connection can be rotated by 90 degrees. Both the power connection and the feedback connection on the motor are IP65 rated. The cooling fan is IP54 rated and the plain motor shaft is IP40 rated. The motor is packed in a pallet or carton. There is an envelope in which a delivery slip and a sticker indicating information about customer, delivery slip number, consignment and freight company are listed. The motor has a type plate, which is located on the front of the air baffle on the right upper hand side. The second type plate is taped over the original one and can be removed.