Product Description
The 2AD100C-B05OB1-AS00-D2N2 asynchronous motor uses a flanged socket for the feedback connection. The Bosch Rexroth motor features a drive controller connection and an axial blower connection. This product cannot be connected to a blower base. The device also has no labyrinth seal. This unit has a nominal power rating of 5.5kW as per DIN VDE 0530 specifications. It is needed to incorporate an air channel for its cooler to conduct clean air when the motor operation is performed in a dirty environment. The product-associated power connection determines its blower connection. This device’s malfunction often happens when there is a problematic mechanical connection to the machine.
The motor blower maintenance must be done only after disconnecting its connection and switching off the blower. It has to mandatorily be secured against unauthorized use and restart during maintenance work. This product portrays high housing temperature when its bearings are defective or worn out. The device is compatible with an ECODRIVE, DIAX or INDRADRIVE series drive controller. This unit is intended to be used only in its original state. It is deployed in the printing and packaging industries. The motor features a 35Nm nominal torque rating. This 2AD100C-B05OB1-AS00-D2N2 motor portrays a warranty for one year.
The product portrays flange installation to comply with the demands of different installation conditions and requirements. This device installation is to be done at an elevation of 0m to 1000m over sea level. The unit comprises complete protection against dust. Its mounting is possible in IM B5, IM V1 and IM V3 orientation in accordance with DIN IEC 34-7 specifications. This motor houses a keyway in the hub that is not based on the length of the key. The product has reduced mechanical service life for its bearings if the standard bearings assembly has more than the specified load. This motor dispatch is done to any location of your choice.
