Product Description

The 2AD100C-B05OA2-AS03/S001 asynchronous motor is prone to axial plus radial loads during the operation phase. The Bosch Rexroth motor can never be operated at higher than 55°C. This device's cooling action takes place by airflow through its axial blower. The unit has the capability to work like an induction motor. Its power, blower and feedback connections are incorporated into the electrical connections. This motor is not recommended for machine elements such as helical driving pinions that trigger axial loading. This product allows a two-speed planetary gearbox to be fitted only if it has a keyway shaft. The device shows decreased performance at an installation elevation ranging between 1000m and 5000m.

This motor is not ideal for use in a strongly polluted environment. The unit does not guarantee safe operation if its maximum speed limit is exceeded. Its type designation along with key technical details are highlighted on the type plate. The product-associated components do not use any materials that are harmful to the environment for their construction. The device housing is to be touched only after wearing gloves when it is under operation because of its hot surface. This unit may cause unfavorable drive controller movements if it has defective components. This 2AD100C-B05OA2-AS03/S001 asynchronous motor has a warranty for one year.

The product has two NTC thermistors of which only one is connected at a time. Its feedback with high resolution has +/-1.2’ absolute accuracy. This device has 35Nm nominal torque in accordance with DIN VDE 0530 specifications. The unit incorporates an axial blower with a frequency of 50/60Hz and a tolerance of +/-10%. Its bearings have a maximum mechanical service life of 20,000 operating hours. This motor uses a terminal box with a cable-threaded joint for connecting the blower. The product comprises a concentricity tolerance according to DIN 42955 – R specifications. This asynchronous motor shipping is performed through trustworthy logistics agents.