Product Description

The 2AD100C-B05OA2-AS03-A2N2 Bosch Rexroth asynchronous motor features the connections for its NTC thermistor as well as holding brake in its power terminals. The motor feedback connection is established by means of a flanged socket. This product houses the power terminal connection on its top. The device-associated cable and plug for its power connector must be ordered separately. These unit-associated electrical connections have to be undertaken by only trained personnel. Its blower must be permanently set with a voltage by means of the winding interconnection present in the terminal box. The product comprises two NTC-type temperature monitoring sensors permanently installed in its windings.

This device is meant to be operated at an ideal temperature ranging between 0°C and 40°C. The unit is associated with IP 50 protection degree for the output shaft without a shaft seal. It may malfunction due to the entry of dust and fluids into its interiors with vertical installation. This motor cannot be put into operation without its blower attachment. The product may face thermal overload if its blower performance is reduced. This device-related holding brake should be checked for its functioning with the brake control command prior to its startup. The asynchronous motor is available with a year’s Wake Industrial warranty.

This product cannot be operated like a main spindle. This unit should depict a load torque that is lesser than the minimum available dynamic torque. It may feature film rust on the brake friction surface if the holding brake is used only sporadically. The motor needs no grind in action for the brake with normal operation. This product incorporates a smooth output shaft that is recommended for friction-locked style shaft-hub connections. The device supports a radial force at the shaft based on the average speed and bearing assembly. This 2AD100C-B05OA2-AS03-A2N2 asynchronous motor is shipped to any global address of your choice.