The 2AD100C-B05OA2-AS03-A2N1 asynchronous motor manufactured by Bosch Rexroth may have a dangerous motion because of a software error. This motor has a very hot surface when it is in use. The product is intended to be mounted only on commercial machinery. This device is operated by machine tools along with the drive controller. The unit encompasses a squirrel-cage rotor. It is fixed with a blower for surface ventilation. This motor offers a drive solution with high power density when it is used with an INDRADRIVE series drive controller from the manufacturer. The product is tested to offer assurance of operational reliability and safety.
This device is capable of performing the application-specific functions only if the associated drive controller has been programmed before the startup is done. The unit has to be correctly installed and mounted for safe and optimum operation. Its holding brake is directly controlled by the drive controller connected to it. This motor must adhere to the general safety and installation instructions with respect to its handling and mounting. The product functions like an air-cooled induction motor. This device incorporates a frame size based on the height of the shaft. The unit cannot be operated without a blower. This asynchronous motor comprises a one-year backup support period.
The product deploys a suction-type airflow. Its holding brake cannot ensure the safety of the operating personnel. This device has a DS centering hole in accordance with DIN 332, Sheet 2 specifications at the end of the output shaft. The unit comes fitted with standard bearings. It has a nameplate with its type designation and additional product data. This motor portrays a derating speed when its power and torque drop before the rated speed is reached. The product may be fitted with gearboxes under certain conditions. This device has up to IP 67 protection class if the manufacturer’s cables are used for the connection. This asynchronous motor dispatch is done worldwide.