Product Description

2AD100C-B05OA1-AS23-A2N2 is a servo motor designed for industrial applications. It belongs to Bosch’s 2AD product line. 2AD motors are available in versions for flange mounting and for flange and foot mounting. The 2AD100C-B05OA1-AS23-A2N2 is a motor designed for flange mounting. Size of the motor flange is 192 millimeters and the diameter of each mounting hole is 14 millimeters. Length of the servo motor is 613 millimeters and its centering diameter is 130 millimeters. The motor has a plain shaft that is ideal for friction-locked shaft-hub connections. The higher run quality and the backlash-free connection between shaft and hub are a significant advantage of this recommended design. Use of plain shafts is recommended for powerful reverse operations that can cause the key to swing out. Furthermore, increasing deformations in this area can cause the shaft to break.

The motor shaft does not include a seal. The 2AD100C-B05OA1-AS23-A2N2 is fitted with an axial blower, which is a mechanical device used to move air or gas parallel to the axis of rotation. The blower is designed to create airflow in a straight-through direction, with the air or gas entering and exiting the fan along the same axis. Input voltage rating of the blower is 230 Volts AC. The 2AD100C-B05OA1-AS23-A2N2 is also equipped with an electrically-released holding brake. This is a safety device that helps to prevent accidents caused by unintentional motor shaft rotation. The 2AD100C-B05OA1-AS23-A2N2 supports high-resolution feedback. It can be used with a servo controller. The controller also provides motor power through a power cable. This cable connects to a power connector on top of the housing that points towards side A. The 2AD100C-B05OA1-AS23-A2N2 motor is equipped with standard bearings.