Product Description

2AD100C-B05OA1-AS23-A2N1 is a Bosch Rexroth servo motor. It is known as a servo motor because it is equipped with a sensor for speed and position evaluation. The motor sends measurements made by the sensor, known as feedback, to a connected servo controller. The controller uses feedback to calculate difference between desired and actual values. The amount of difference between desired and current values drives a change in the controller output. The controller, usually a drive controller, modulates the voltage and frequency of its output. The motor responds to changes input voltage and frequency by changing its speed and position. Even through asynchronous motors like the 2AD100C-B05OA1-AS23-A2N1 don’t support highly precise speed control, they are widely deployed for several industrial applications such as packaging machines and printing machines.

A product manual supplied with the motor lists all relevant technical specification. It must be noted that these specifications are valid for optimal operating conditions that include 0 to 45 degrees Celsius temperature and altitude between 0 and 1000 meters. Nominal power output of the 2AD100C-B05OA1-AS23-A2N1 motor is 5.5 kilowatts and its nominal torque output is 35 Nm. Base speed of the motor is 1500 RPM and its peak speed is 9000 RPM. Nominal voltage and current ratings are 168 Volts and 27 Amps respectively. The motor is equipped with an electrically-released holing brake that provides 24 Nm holding torque, operates at 24 Volts DC and draws 0.9 Amps. An axial blower on the motor requires 240 Volts AC supply. Clamping and release delay for the motor are 100 and 60 milliseconds respectively. The motor weight is 49 kilograms and the mass of the brake is 1.5 kilograms. The motor shaft is plain and is without a seal.