Product Description

The 2AD100B-B05OL1-AS03 asynchronous motor produced by Bosch Rexroth has a windings designation code of AS. This motor has no output shaft. The product is intended for mounting into a machine that is meant for commercial use. This device must adhere to the safety guidelines specified in its documentation. The unit operation as well as maintenance must be carried out only by personnel authorized to operate electrical circuits. Its protective plastic sleeves on the connectors and shaft have to remain intact during the transport and storage period. This motor needs to be retained in its original state without making any structural changes to it.

The product type plate features the type designation and key technical details that can be of help at the time of service. This device is operated in printing machines. The unit renders maintenance-free operation due to its asynchronous nature. It supports a maximum installation elevation of 5000m above sea level. This motor incorporates an IP 65 protection rating for its power plus blower connections. The product comprises high-run quality. This device incorporates bearings with grease lubrication. The unit has a reduced lifespan for its bearings when the ambient operating temperature of the motor is exceeded. This asynchronous motor depicts one-year backup support.

The product has 22Nm nominal torque as per DIN VDE 0530 specifications. Its power terminal is oriented towards the left side. This device supports blowing action for the air stream from side B to A. The unit encompasses a power connection with the thermistor connection, blower connection and feedback connection in its electrical connection. This motor pickup should not be done by holding on to its connected blower. The product-related blower features an average air volume of 230m³/h. This device tends to get damaged as a result of improper storage. This 2AD100B-B05OL1-AS03 asynchronous motor can be sent to any worldwide address of your preference.