Product Description

The 2AD100B-B05OB1-AS13/S001 asynchronous motor provided by Bosch Rexroth portrays flange mounting. This motor supports a power connector connection with thread. The product installation can be done only after closing the open connection of its power lines so that there is no short circuit due to greases. This device must have firmly fitted plug-in connections when the machine with its installation is in operation. The unit can trigger unpredictable dangerous situations when voltage conducting lines are either connected or disconnected. Its electrical parts can be worked on only by trained personnel with appropriate tools. This motor connection should be done only after its mechanical mounting has been established properly.

The product storage and transportation are to be done only in a horizontal orientation. This device flange must be checked to see that it is free of burrs before mounting. The unit and its machine need to be shut down and secured against a restart during service and maintenance work. It has a windings designation of AS. This motor might show dangerous movements because of a faulty setting from the control or there is a problem in the way its components are used. The product power-up action has to be implemented only after its protective conductor connection is in place. This asynchronous motor comes with backup support for one year.

This device needs a sufficient discharge time of 35 minutes before it is touched after turning off its power. The unit allows its parts to be replaced with only those that are specified by the manufacturer. It has a nominal current rating of 17A and nominal voltage rating of 182A. This motor encompasses protection against mechanical damage and moisture with the plastic sleeves on the shaft as well as connectors. The product is to be in a load-free state during transport as well as storage. This asynchronous motor worldwide shipment is done by a trustworthy logistics team.