Bosch provides economical and durable solutions for almost every industrial sector. The company develops a wide range of frameless motors, brake resistors, and synchronous motors for its clients.
The 1MS375B-6B-A2/S010 model comes with an aluminum cooling jacket that uses coolant (water) for maintaining the ambient temperature of the stator. The coolant flows around the stator and dissipates the heat generated during continuous operations. The coolant dissipates 5.1 kW of heat from the stator and the coolant temperature at the inlet should be between +10 to +40 degree Celsius. The volume of the liquid cooling duct of the stator is 2.7 liters. The input power required by the stator is AC 280 V, supplied by the respective drive controller. The 1MS stator must be operated together with the controller prescribed by the supplier. As per the 1 MB instruction manual, the stator must be installed under the allowable temperature range of 0 to +40 degree Celsius and the maximum installation elevation for the stator is 1000 meters above sea level. The 1MS stator can perform various C-axis operations. The model consumes the rated current of 120 A to generate the rated torque of 636 Nm in the attached rotor. NTC and PTC resistors are attached to the stator and the winding inductivity of this stator is 2 mH.
The model 1MS375B-6B-A2/S010 generates the winding resistance of 0.097 Ohms and the constant torque generated by the stator in the rotor is 6.28 Nm/A. The stator weighs around 162 kg. The model used a power cable with a smaller exterior diameter for making an electrical connection. The continuous power generated by the stator is 40 kW. The stator is not protected against liquids, owing to its IP00 protection category. Wake Industrial offers worldwide delivery of this stator of 1 MB motor. Order now, and get it at your work address. This unit can be shipped globally with a one-year warranty period from Wake Industrial.