Bosch Rexroth is mainly focused on manufacturing high-quality economical products that can be configured to fit individual customer needs. The company produces a wide range of 1MS stators, supply units, and drive controllers.
The 1MS310D-6B-A2/S010 model is designed according to the American standards by Rexroth Indramat. The company is one of the leading automation equipment manufacturers in the world and it also offers 1MS stators to its client around the globe. The 1MS stator should only be used with the devices and modules prescribed by the supplier. The stator has a winding code of 6B and there are 3 pole pairs in this model. The model is suggested to be installed in a dry and shock-free environment due to its reduced protection classification. Its IP00 protection classification will not provide any protection against liquids and ingress of dust. The 1MS stator can be used under humid conditions (without condensation) with the surrounding temperature ranges between 0 to +40 degree Celsius. An electrical cable conducted through the stator end is used in this model to take 299V input power from the main voltage source. The model can be used with a third-party controller but for better performance, it is recommended to use the stator with the controller prescribed by the company.
The model 1MS310D-6B-A2/S010 is equipped with a high-resolution encoder that assists in precise and accurate position detection of the rotor. The stator winding has 1.86 mH of inductance and 0.163 Ohms of resistance, at 20 degree Celsius. The stator is used to generate the constant torque of 340 Nm in the attached rotor while operating at the constant current of 81 A. The approximate weight of the stator is 108 kg. The model faces a power loss of 3.8 kW through liquid cooling. The volume of the liquid cooling duct of the stator is 1.8 liters. This unit can be shipped globally with a one-year warranty period from Wake Industrial.