Product Description

Bosch Rexroth is especially dedicated to customer satisfaction, offering high standards components such as stator and rotors, brake resistors, and frequency converters. These products are frequently used in a wide range of automation areas.

The 1MR200D-B085/S001 model has an overall weight of 19 kg and can only be used contrary to the directions in the device's user manual. The rotor only accounts for one-third of the system's heat dissipation and is powered by the magnetic field created stator. Depending on the winding configuration, the attached stator draws power from a 138 - 350 V power source. The 1MR rotor has an insulation category of F and can be put up to 1000 meters above sea level. The work fixture for mounting the rotor must be resistant to heat up to +200°C and capable of supporting the weight of both the rotor and spindle. Furthermore, it must provide a flat and horizontal surface for the rotor. The 1MSR rotor has an inner diameter of 85 mm and can run at a rated speed of 6000 rpm. This rotor achieves a top speed of 20000 rpm by taking a peak voltage of 201.9 V. The rotor's allowed temperature range is 0 to +40 degrees Celsius. Because of its low protection rating, the rotor must be secured from fluids.

The model 1MR200D-B085/S001 is designed to be fitted in a stator with frame length "D" and in a variety of winding configurations (4B, 4C, 4D, 4E, 4F). The rotor is employed in the same way as in a direct drive main spindle motor, and it delivers a rated power of 9-31 while working at a rated current of 48-84 A, depending on the stator winding. The model (1MR200D-B085/S001) comes with a 1-year replacement warranty and can be delivered to your desired address in a defined time span.