Product Description:

The ZS2000-2620 is a motion accessory connector produced by Beckhoff within the ZS Motion Accessories series. As an M12 socket with female contacts, it provides a detachable interface for sensor, actuator, or power cabling in automated machinery. By providing a standardized screw-termination field connection, it simplifies panel wiring without soldering. In factory environments, this component links drives, I/O terminals, or distributed devices to the main control network while maintaining ingress protection after assembly.

For signal assignment, the connector follows the A-coded pin layout used for sensor technology. The installation thread is M12, and inside the insert, four contacts are arranged in a 4-pin pattern for combined power and signal lines. Electrical capability reaches 250 V line potential and a continuous load of 7.5 A at 40 °C; both ratings support low-power servomotor brakes or compact valves. Transient overvoltage resilience is specified at 1.5 kV, and when the coupling nut is tightened, the interface meets IP65/67 (Screwed) so washdown or dust-laden zones do not compromise the circuitry.

Cable entry accepts conductors up to AWG16 (1.5 mm²), terminated by a clamp that is secured with only 0.3 Nm of screw torque, so installation can be completed using standard control-cabinet drivers without risk of thread damage. The stainless coupling ring is fastened with 0.6 Nm of nut torque to maintain contact compression, and no internal EMC braiding is present. Each assembled piece weighs 0.023 kg, adding minimal load to moving axes where wiring chains impose mass limits.