ZK7000-0303-0002 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK7000-0303-0002 is an extension cable from the ZK Motor Cables series, featuring a cable length of 0.2 meters and constructed with a drag-chain suitable PUR jacket. It is equipped with M8 P-coded male to female connectors, supports EtherCAT P interface, and is rated for 3 amps at 50 V AC or 60 V DC. The cable has IP65/IP67 protection and uses a 1x4xAWG22 structure.
Internal Product Review
The ZK7000-0303-0002 is an EtherCAT P extension cable with feed-through that supports clean, efficient motor-cable integration. Drag-chain suitability and a PUR jacket make this Beckhoff cable a strong choice for dynamic installations requiring dependable service life.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK7000-0303-0002 is an extension cable with feed-through that Beckhoff supplies under its ZK Motor Cables series for EtherCAT P installations. The assembly links field devices that share combined power and real-time communication on one line, so it simplifies wiring inside distributed motion or I/O stations. As a male-to-female lead configured for the EtherCAT P interface, it allows an existing trunk to be extended without splicing conductors, and its PUR jacket plus drag-chain rating help the product remain flexible during continuous machine movement.
The cable is only 0.2 m long, allowing a tight loop between adjacent terminal points while avoiding excess slack in the carrier. Its jacket and conductor bundle are classified as suitable for drag-chain use, indicating the outer sheath withstands millions of bending cycles without cracking. Internally, the wiring follows a 1 x 4 x AWG 22 structure, so four equal cross-section cores handle both supply and signal lines for deterministic EtherCAT P timing. The mating ends use a P-coded key so accidental connection to standard sensor networks is prevented, and the molded plug shells follow the compact M8 thread size that fits densely populated control panels. Mechanical coding 1 on the receptacle aligns the guide bump with Beckhoff couplers, while the printed US 24 V DC / UP 24 V DC legend identifies the dual power rails carried through the pair.
Ingress protection is rated at IP65/IP67, so the mated connectors tolerate spray-down cleaning and temporary submersion encountered on packaging lines. The four cores can each carry up to 3 A continuously, and insulation clearances support system potentials of 50 V AC / 60 V DC. The cable has 4 pins, with two reserved for logic and two for power, matching the EtherCAT P layout. With a PUR outer jacket, the cable resists oil and coolant exposure, allowing power and data to be routed through dynamic axes without external conduit.
