ZK7000-0101-0100 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK7000-0101-0100 is a 10-meter motor cable from the ZK Motor Cables series featuring EtherCAT-P coding and a cable structure of 1x4xAWG22. It is equipped with M8 male-to-male connectors, supports rated currents up to 3 A at 40°C, and offers IP65/IP67 protection. The cable has a PUR jacket, is suitable for drag-chain applications, and supports rated voltages of 50 V AC or 60 V DC.
Internal Product Review
The ZK7000-0101-0100 is a Beckhoff ZK motor cable designed for EtherCAT-P connections. Drag-chain suitability and a PUR jacket make the assembly especially appealing for repeated-motion applications. IP65/IP67 protection adds strong value for dependable industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK7000-0101-0100 is a pre-assembled motor cable manufactured by Beckhoff for the ZK Motor Cables series. It carries combined power and EtherCAT P communication between drives and field devices, allowing decentralized I/O and servo modules to be supplied through a single line in industrial automation cells. Using one cable for both functions helps simplify routing between the cabinet and distributed machine sections. The assembly is intended for applications where control data and device power must travel together without separate auxiliary leads.
This cable is supplied in a length of 10.0 m, giving sufficient reach for typical cabinet-to-machine runs while maintaining signal integrity. The conductor pair has a cross-section of 0.34 mm² (AWG22), which supports EtherCAT P transmission over the stated distance. Electrical suitability is supported by a rating of 50 V AC/60 V DC and a continuous load capacity of 3 A at 40 °C, allowing the cable to carry both logic supply and peripheral power on the same assembly. The four-pin interface has a protection rating of IP 65/IP 67, which helps keep out dust and withstand water exposure during machine cleaning. This combination makes the cable suitable for enclosed equipment as well as machine areas where washdown or splash can occur.
The four conductors use a 1x4xAWG22 structure that matches the M8 circular connectors molded on each end, and the straight male-to-male layout helps the cable pass through narrow ducts. A PUR outer jacket resists oils, coolants, and repeated torsion during machine motion. The assembly is also classified as Drag-Chain Suitable, so it can be used where the cable must flex repeatedly in guided motion systems. Mechanical coding number 1 and the dedicated EtherCAT P pin assignment help prevent mismating with standard A-coded sensor cables. The stated power allocation keeps device supply paths separated within the connector pattern for stable communication and power delivery.
