ZK4724-0410-2200 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4724-0410-2200 is part of the ZK Motor Cables series and features an 8-pin M12 connector with a cable length of 20 meters. It supports a maximum cable voltage of 300 V AC, a rated current of 2 A at 40 degrees Celsius, and offers a maximum acceleration of 10 meters per second squared. The cable also provides IP65/67 protection with 85 percent minimum shield coverage and a conductor construction of 32 by 0.10 mm.
Internal Product Review
The ZK4724-0410-2200 is a Beckhoff motor cable configured with an 8-pin M12 connector for clean, dependable machine interfacing. IP65/67 protection and 85% shield coverage support stable performance in demanding motion applications. A 2 million cycle rating makes the cable a strong choice for long-service automation installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4724-0410-2200 motor cable is produced by Beckhoff within the ZK Motor Cables series. It links servo or stepper motors to decentralized drives and I/O modules, carrying both power and feedback signals along moving machine axes. The assembly is intended for drag-chain layouts where repeated bending, acceleration, and torsion occur on automated assembly lines. By integrating its connector at the factory, Beckhoff removes field-wiring variability and maintains consistent shielding and strain relief.
The cable length of 20.00 m allows routing between control cabinets and mobile carriages without intermediate plugs. Its cross-section of 3 x 2 x 0.25 mm² (AWG24) provides three shielded twisted pairs sized for low-level signals while keeping the overall diameter compact. A factory-installed M12 circular connector mates with Beckhoff drives when tightened to the recommended 0.6 Nm. The conductors can carry 2 A at 40 °C, supporting brake coils or encoders without temperature rise. Fine-strand 32 × 0.10 mm copper and a PUR jacket tolerate continuous drag-chain motion up to 10 m/s² acceleration and 3 m/s travel speed, while the design observes a 30 V working level and a 300 V AC insulation ceiling. Insulation resistance is specified at 200 MΩ·km, and the 8-pin layout keeps power and signals in one cable.
Service life is validated for 2 million bending cycles, meeting the demands of round-the-clock pick-and-place gantries. An overall braid delivering at least 85% optical coverage limits electromagnetic emission and maintains shield continuity. When the threaded coupling is fully engaged, the interface reaches IP65/67 (Screwed) protection, sealing the contacts against dust and water jets. Electrical integrity is proven at a withstand test level of 3000 V, well above the 30 V working voltage.
