ZK4724-0410-2030 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4724-0410-2030 is part of the ZK Motor Cables series and has a cable length of 3 meters with an M12 connector and A-coding. It features a jacket made of polyurethane, a cross-section of 3 x 2 x 0.25 mm² (AWG24), and supports a maximum acceleration of 10 meters per second squared. The cable is rated for 2 Amps at 40 degrees Celsius and has a minimum bend radius of 5 times the outer cable diameter.
Internal Product Review
The ZK4724-0410-2030 is a Beckhoff ZK motor cable with an A-coded M12 connector and an 8-pin configuration. The PUR jacket and at least 85% shield coverage support dependable durability and clean signal performance in industrial service. Rated for 2 million cycles, this cable is an excellent fit for motion-duty applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4724-0410-2030 motor cable is produced by Beckhoff within the ZK Motor Cables series. It is a pre-assembled wiring solution that carries three power phases, two twisted signal pairs, and protective grounding between a servo drive and its corresponding motor. By combining power and feedback lines in one jacket, the cable simplifies panel layout and helps maintain electromagnetic compatibility in automated assembly machines and other motion-focused installations. Because the power and signal elements are bundled together, the cable supports cleaner routing through compact machine frames where moving axes leave little room for separate harnesses. Its pre-assembled format also helps keep the connection path consistent from the drive to the motor.
The cable is supplied in a fixed length of 3.00 m, providing a ready-made connection from the control cabinet to the motor. An M12 circular connector with A-coding and eight positions ensures keyed mating and secure orientation during installation. Copper strands follow a 32 × 0.10 mm construction, delivering flexibility while meeting the continuous-motion requirement of up to 10 m/s² acceleration in cable tracks. Current-carrying capability reaches 2 A at 40 °C, supporting low-power servo axes, and a tinned copper braid with ≥ 85% coverage helps limit radiated noise so the feedback channels remain stable near high-frequency inverters. This combination of flexibility and shielding suits repetitive axis movement in densely packed automation equipment.
The internal layout follows a 3 x 2 x 0.25 mm² (AWG24) scheme, with three power conductors and two signal pairs sharing the same PUR jacket. With an overall diameter of 6.6 mm ±0.2 mm, the cable fits standard drag-chain separators and requires a minimum fixed bend radius of five times that diameter. Dynamic chain tests confirm a service life of 2 million cycles when the cable operates within the stated acceleration limit. Electrical insulation is rated for an operating potential of ≤ 300 V AC and withstands a 3 kV test pulse without breakdown, providing margin for typical control-circuit duty. The compact outside diameter also helps the cable move through small cable-chain guides used on servo-driven assemblies.
