ZK4704-0411-2010 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4704-0411-2010 is a motor cable from the ZK Motor Cables series and has a length of 1 meter with an outer diameter of 8.8 mm. This cable supports a power current of 14 Amps at 630 V AC/DC and uses a PUR polyurethane jacket. Rated IP66/67, it allows up to 10 million cycles, a maximum acceleration of 50 meters per second squared, and operates in temperatures from -20 to +60 degrees Celsius.
Internal Product Review
The ZK4704-0411-2010 is a Beckhoff ZK motor cable with a PUR jacket and IP66/67 protection. Electrical performance is strong for motion applications, with 14 A power current and ≤ 300 V cable voltage. A 10 million cycle rating makes the cable a dependable choice for repeated dynamic service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4704-0411-2010 motor cable is manufactured by Beckhoff as part of the ZK Motor Cables series. Delivered in a fixed 1.00 m length, the assembly provides the power link between an AX servo drive and its synchronous motor in industrial automation cells. The cable carries phase conductors, protective earth, and signal shields in a compact profile intended for drag-chain use. Factory-crimped connectors reduce wiring effort, and the molded backshells maintain shielding continuity, so the cable can be replaced quickly during scheduled service.
Each copper core has a cross-section of 0.75 mm², enabling a continuous load of 14 A without excessive heating. The insulation system withstands up to 630 V AC/DC on the power group, while auxiliary pairs are limited to 300 V for control logic. Contact resistance stays below 5 mΩ across the pluggable interface, keeping voltage drop small. A PUR outer jacket resists oils and weld spatter, and the round diameter of 8.8 mm ± 0.2 mm fits standard energy-chain separators. When the screw locking collar is tightened, the connection achieves ingress protection of IP66/67. For static routing, the minimum bend radius is four times the outside diameter, which helps prevent conductor kinking during cabinet installation.
Dynamic performance suits moving gantries and pick-and-place modules. The cable is rated for up to 10 million continuous flex cycles at a moving bend radius of ten times its diameter. It tolerates acceleration peaks of 50 m/s² and maintains signal integrity at a travel velocity of 5 m/s. Operation is permitted in ambient air from -20 to +60 °C; outside this range, the polyurethane sheath may stiffen or become brittle. Connector hardware endures 500 mating operations, and the assembly retains full current-carrying capacity throughout that service life.
