ZK4701-0421-2100 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4701-0421-2100 is a motor cable from the ZK Motor Cables series and is 10 meters long. It features PUR jacket material, PP insulation, and IP66/67 protection when screwed. The cable has a rated power current of 14 Amps at 630 V AC/DC and supports up to 500 mating cycles.
Internal Product Review
The ZK4701-0421-2100 is a Beckhoff motor cable engineered for dependable motion-system connectivity, with a 14 A power rating and 630 V AC/DC capability. PUR jacket construction and IP66/67 protection in the screwed condition support clean installation in demanding industrial service. A dynamic life of up to 5 million cycles makes the cable an excellent choice for repetitive cable-track applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4701-0421-2100 is a motor power cable produced by Beckhoff within the ZK Motor Cables series. It routes drive output from a servo inverter to a motor in automated equipment, providing the power path between the control hardware and the moving axis. The assembly is 10.00 m long and uses a PUR outer jacket that resists oil and abrasion in industrial service. Its conductor insulation is polypropylene, and the brass contacts are gold-plated to reduce mating resistance during repeated plug-ins. This cable type is suited to machines where dependable power transfer and repeated connector handling are part of normal operation.
The cable carries phase and protective conductor currents, and its conductor cross-section of 0.75 mm² supports continuous load flow. Combined with a rated current capacity of 14 A, it suits compact servomotor frames that draw moderate power. Electrical insulation supports a rated operating voltage of 630 V AC/DC and an impulse withstand level of 6.0 kV, which helps prevent breakdown during switching peaks. When the M12 circular connector is fully tightened, the interface reaches IP66/67, blocking dust ingress and resisting water exposure during operation. The protective conductor path also supports safe grounding of the connected motor housing.
The assembly is rated for 500 mating operations, and its internal copper strand design tolerates up to 5 million flex cycles. During dynamic use, it can travel at speeds of up to 4 m/s over horizontal strokes of 20 m. Each conductor can be loaded to 20 N/mm² during motion without plastic deformation, and bends can be made down to seven times the outer diameter to limit strain on the insulation. The overall linear mass is 175.0 kg/km, which is useful when cable routing must account for moving load. These motion characteristics fit automated axes that run through frequent travel cycles in gantry, packaging, and material-handling systems.
