ZK4530-0010-0190 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
47 Seconds
The Beckhoff ZK4530-0010-0190 is a motor cable from the ZK Motor Cables series. It features a cable cross-section of 4 x 2 x 0.25 mm² and supports an operating voltage of 300 V AC. The cable tolerates up to 20 meters per second squared acceleration, a maximum speed of 3 meters per second, and is rated for 5 million cycles.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4530-0010-0190 is a drag-chain-compatible motor cable produced by Beckhoff within the ZK Motor Cables series. Designed for servo installations, the cable carries power and sensor lines between a moving motor and its control cabinet. By combining finely stranded conductors with a continuous foil-and-braid shield, the assembly maintains signal integrity during repetitive motion. In automated machinery, the product routes energy and feedback through cable carriers, enabling coordinated axis movement without the weight or maintenance demands of rigid conduits.
The conductor set has a cross-section of 4 x 2 x 0.25 mm², giving eight conductors arranged as four twisted pairs that help minimize crosstalk while keeping the overall diameter compact. For power rails, it tolerates continuous line potentials up to 300 V AC, and each contact path presents a resistance of only < 5 mΩ, so voltage drop across a typical installation remains low. Insulation resistance is ≥ 500 MΩ, which helps reduce leakage currents in high-impedance feedback circuits. A braid coverage of ≥ 85% limits electromagnetic emission and supports reliable encoder transmission even in cabinets that contain switching power devices. Dielectric strength is verified with a 1500 V test pulse, and the copper path shows a maximum loop resistance of 76.0 Ω per kilometer. These values support the stated 7 A current and 160 V AC/DC signal limits.
Dynamic ratings suit the cable for constantly moving axes. In drag-chain guides, it endures accelerations up to 20 m/s² and carrier velocities of 3 m/s, remaining flex-stable for roughly 5 million double strokes across a travel length of 5 m. Installation rules specify a minimum fixed bend radius of 8 times the outer diameter and a moving bend radius of 10 times the outer diameter to help prevent conductor fatigue. Surge immunity of 2.5 kV helps protect connected electronics against drive-induced transients.
