Product Description:

The ZK4530-0010-0150 cable is supplied by Beckhoff within the ZK Motor Cables series. As a pre-terminated motor cable, it carries phase power and feedback signals between a servo motor and its drive controller, enabling coordinated motion in automated production cells, handling modules, and packaging lines. The assembly simplifies wiring while maintaining the electrical integrity needed for fast and precise industrial positioning.

The conductor set has a cross-section of 4 x 2 x 0.25 mm², meaning four twisted pairs of 0.25 mm² wires that keep power and differential feedback paths separated yet compact for tight routing spaces. A factory length of 15.0 m lets the cable span long machine beds without intermediate plugs, and the wire resistance not exceeding 76 Ω/km helps keep drive voltage within tolerance across that distance. Continuous insulation duty is rated at 160 V AC/DC, while the outer sheath safely handles cabinet potentials up to 300 V AC during mixed-supply operation. The copper bundle can conduct 7 A before temperature-rise limits are reached, and surge events up to 2.5 kV are withstood by the insulation system. Contact resistance remains below 5 mΩ, and insulation resistance stays above 500 MΩ to preserve encoder fidelity in electrically noisy environments.

Drag-chain motion is supported by speeds up to 3 m/s and accelerations of 20 m/s². Endurance testing verifies 5 million bending cycles under those operating conditions, helping the cable withstand repeated motion in dynamic machine routes. Connector durability is specified for 500 mating cycles, aided by a 12-pin M23 motor plug and a 15-pin D-sub controller plug that maintain proper pin alignment under vibration. Each finished piece passes a dielectric proof test of 1500 V, confirming insulation integrity after crimping and overmolding.