ZK4530-0010-0130 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
40 Seconds
The Beckhoff ZK4530-0010-0130 is a motor cable from the ZK Motor Cables series. It features a cable length of 13 meters and a cable cross-section of 4 x 2 x 0.25 mm², with an operating voltage of 300 V AC and head A rated current of 7 Amps. The cable supports acceleration up to 20 m/s², speeds up to 3 m/s, and a cycle life of 5 million.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4530-0010-0130 motor cable is produced by Beckhoff within the ZK Motor Cables series. It serves as the movable link that carries drive voltage and feedback lines between a servo motor and its controller in industrial automation cells, while enduring continuous drag-chain travel and maintaining stable electrical characteristics. Its flexible design suits axes that move repeatedly during normal machine operation.
This model is supplied in a fixed length of 13.0 m, giving a predefined routing distance for energy-chain layouts. Its conductor set is arranged as 4 x 2 x 0.25 mm², with eight fine-stranded cores paired and twisted to reduce signal crosstalk in mixed power and sensor runs. This arrangement helps preserve signal quality when power and control conductors share the same outer jacket. The jacket and insulation are rated for a continuous operating potential of 300 V AC, allowing the cable to carry phase and brake lines for low-voltage servo systems. Leakage is limited by an insulation resistance of at least 500 MΩ, which helps keep standby losses and measurement errors low even after repeated flexing. An overall braid with a shield coverage of 85 % or higher protects the conductors from external electromagnetic fields so that encoder and Hall signals remain accurate during high-frequency inverter switching.
Motion use is rated for profiles up to a speed of 3 m/s and a maximum acceleration of 20 m/s², which matches typical pick-and-place or gantry axes that reverse quickly. The cable tolerates continuous torsion of ± 30 °/m, supporting rotary tables or robots where twisting accompanies linear travel. These motion values fit applications where bending and twisting occur at the same time. The insulation withstands a test voltage of 1500 V, and additional values include a 5 million cycle life, a 5 m permissible stroke, and wire resistance of no more than 76 Ω/km.
