ZK4530-0010-0050 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
56 Seconds
The Beckhoff ZK4530-0010-0050 is part of the ZK Motor Cables series and has a length of 5 meters with a cable diameter of 7.5 mm. It features an M23 straight female connector with 12 pins on one end, and a D-sub angled female connector with 15 pins on the other end. This cable supports a rated voltage of 160 V AC/DC and a maximum current of 7 amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4530-0010-0050 motor cable assembly is manufactured by Beckhoff within the ZK Motor Cables series. Intended for industrial automation, the product routes power and encoder signals between a controller and a servo motor, enabling coordinated motion and feedback without separate wiring runs. Factory-terminated connectors at each end eliminate on-site crimping and help maintain shielding continuity inside control cabinets and moving machine axes. The cable suits dynamic installations such as gantries and packaging machinery.
It employs a conductor set of 4 x 2 x 0.25 mm², giving balanced impedance for differential signal pairs and enough copper for drive power transfer. The overall jacket diameter of 7.5 mm keeps the bundle compact for tight carrier channels, while the shipped length of 5.00 m matches common cabinet-to-axis distances. Electrical ratings include 160 V AC/DC insulation and a continuous load limit of 7 A, so the same cable can handle motor current and encoder supply within its rated capacity. The assembly weighs 80.3 kg per kilometer for accurate drag-chain loading calculations. A straight M23 female plug with twelve contacts is fitted on end A, while end B carries an angled 15-pin D-sub female connector for feedback boards. Dielectric strength is verified at 2.5 kV impulse and 1500 V test levels.
For dynamic motion, the cable tolerates speeds up to 3 m/s and accelerations up to 20 m/s² inside energy chains. Flex life is rated for 5 million cycles, and the core bundle can twist ±30 °/m without conductor fatigue, allowing installation on rotary axes or articulated robots. Molded connector strain relief helps reduce stress at the cable ends during continuous operation. The drag-chain and torsion limits help the cable remain stable during repeated motion on equipment with continuous bending and twisting.
