ZK4510-0020-0130 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4510-0020-0130 is a motor cable from the ZK Motor Cables series, featuring a cable cross-section of 7 x 2 x 0.14 mm² plus 2 x 0.5 mm² and a length of 13 meters. Head A uses a 17-pin M23 plug rated at 7 A and 125 V AC/DC, while Head B has a 15-pin D-sub socket. The cable is constructed with a PUR jacket, supports up to 30 m/s² acceleration, and is rated for 10 million cycles with a shielding coverage of at least 85%.
Internal Product Review
The Beckhoff ZK4510-0020-0130 is a motor cable with a PUR jacket and shielding coverage of at least 85%. An M23 plug on Head A and a 15-pin D-sub socket on Head B support clean integration with compatible motion hardware. A 10 million cycle rating makes this cable a strong choice for repeated-motion service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Beckhoff manufactures the ZK4510-0020-0130 as part of its ZK Motor Cables series. This pre-assembled hybrid cable is intended for dynamic motor installations where both power and feedback signals must track the moving load. By combining multiple shielded conductor pairs with dedicated supply cores, it simplifies wiring of servo axes, reduces cabinet space, and maintains consistent electrical parameters throughout the cable run in industrial automation cells. The assembly ships with an M23 plug on the drive side and a D-sub feedback socket on the motor side, allowing direct connection to Beckhoff AX and AM components without on-site crimping.
The cable has seven power and brake cores plus two sensor pairs, arranged as a 7 × 2 × 0.14 mm² + 2 × 0.5 mm² bundle; this geometry keeps impedance predictable and supports a continuous operating voltage of 30 V on the signal pairs. Its overall length is 13.00 m, providing enough reach for medium-sized gantries without excessive voltage drop. On the controller side, the Head A interface is a 17-pin M23 plug that carries phase current up to 7 A max. while keeping encoder and brake contacts separated to reduce crosstalk. The PUR outer jacket resists oil, welding spatter, and chain abrasion, and the cable remains flexible for energy-chain routing.
For moving-axis service, the assembly withstands accelerations up to 30 m/s² over strokes as long as 20 m and endures 10 million bending cycles, supporting high-duty positioning systems. The braided shield covers at least 85% of the surface, so conducted and radiated emissions stay within EMC limits even when the cable runs next to sensitive I/O wiring. Head A circuits can switch up to 125 V AC/DC, enabling brake release or auxiliary supply lines without a separate harness, while the motor end uses a 15-pin D-sub socket for encoder feedback to preserve pin compatibility with Beckhoff servos.
