ZK4510-0020-0100 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4510-0020-0100 is a motor cable from the ZK Motor Cables series with a length of 10 meters and a cross-section of 7 x 2 x 0.14 mm² plus 2 x 0.5 mm². It has a 17-pin M23 connector with IP66/67 protection, a 15-pin D-sub with IP20 protection, and supports a maximum acceleration of 30 meters per second squared. The cable uses a PUR jacket and is rated for up to 10 million cycles with a maximum speed of 4 meters per second.
Internal Product Review
The ZK4510-0020-0100 is a Beckhoff motor cable built with a PUR jacket for dependable performance in machine wiring. The 17-pin M23 interface with IP66/67 protection gives the assembly a very secure, field-ready connection at the motor end. For continuous motion systems, the 10 million-cycle rating stands out as a major service-life advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4510-0020-0100 is a moving-grade motor cable manufactured by Beckhoff within the ZK Motor Cables series. It connects servo amplifiers to motors in automated machinery, transmitting power through its paired conductors and forwarding encoder data through integrated signal cores. This hybrid design supports dynamic cable-chain applications where continual flexing and electrical reliability are required on production lines and gantry systems. Because power and feedback conductors are combined in one cable, routing can remain compact on axes where available space is limited.
At a fixed length of 10.00 m, the cable reaches from cabinet to moving axis without intermediate junctions. The conductor layout of 7 x 2 x 0.14 mm² + 2 x 0.5 mm² separates encoder pairs from power pairs to minimize crosstalk while keeping the overall diameter compact. Power transmission is rated for an operating voltage of 30 V, matching typical low-voltage servo windings. Motor termination uses a 17-pin M23 male connector that seals to an IP66/67 interface; this end resists coolant spray and dust ingress, and the head is specified for 500 mating cycles. The control-side connector is a 15-pin D-sub plug with an IP20 rating for enclosure-protected panels. Under motion, the cable withstands dynamic tensile stresses up to 20 N/mm² without conductor damage. This arrangement supports clean separation between control signals and motor supply lines during repeated machine movement.
The cable’s mechanical profile supports continuous flex operation in energy-chain layouts. It tolerates accelerations up to 30 m/s², linear speeds of 4 m/s, and travel distances as long as 20 m while installed at site elevations up to 2000 m. Cycle life is qualified for 10 million bend cycles, which aligns with high-duty pick-and-place axes. A polyurethane outer jacket made from PUR compound provides abrasion resistance and oil immunity, and the bundle endures a static tensile load of 50 N/mm² when the machine is at rest. These operating characteristics support stable cable movement during rapid indexing, frequent reversing, and long production runs.
