ZK4510-0020-0060 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4510-0020-0060 is a motor cable from the ZK Motor Cables series. It has a cable length of 6.00 meters and operates at up to 30 V. The cable features a straight M23 17-pin female connector on one end and an angled D-sub 15-pin male connector on the other. Its jacket is made of PUR with wire insulation of polypropylene, and it supports a dynamic tensile load of 20 N/mm² and a maximum acceleration of 30 m/s².
Internal Product Review
The ZK4510-0020-0060 is a Beckhoff ZK motor cable with an M23 straight 17-pin female plug on End A and an angled D-Sub 15-pin male connector on End B. PUR jacket material and PP wire insulation give the assembly a well-engineered feel for continuous industrial motion service. The 10,000,000-cycle rating stands out as a major advantage for demanding automation applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4510-0020-0060 is a flexible motor cable produced by Beckhoff within the ZK Motor Cables series. This hybrid assembly links a servo motor to its drive or I/O terminal and carries both power and feedback signals in one sheath, simplifying routing in automated cells and gantries. It is intended for continuously moving drag-chain installations, where its polyurethane jacket and polypropylene core insulation protect conductors from oil, abrasion, and constant bending stress.
The cable’s composite core contains 7 twisted power-signal pairs plus two larger conductors, giving a cross-section of 7 × 2 × 0.14 mm² + 2 × 0.5 mm². A total length of 6.00 m is supplied for direct cabinet-to-motor runs without intermediate junctions. Conductor voltage is rated at 30 V, while the straight M23 female plug on End A can withstand a dynamic tension of 20 N/mm². That connector also carries up to 7 A per power pin and supports a peak potential of 125 V AC/DC across its 17 contacts, allowing low-voltage servo power and encoder reference lines to share a common header. The angled 15-pin D-Sub male on End B mates to standard Beckhoff AX servo drives and is specified for 500 insertion cycles. PUR cladding limits external diameter growth under flexion, and PP insulation keeps dielectric losses low, sustaining signal integrity over the entire cable length.
For dynamic axes the design tolerates 30 m/s² acceleration, a linear velocity of 4 m/s, and strokes up to 20 m without exceeding bend radius limits. Mechanical endurance is verified for 10,000,000 drag-chain cycles, reducing maintenance stops in high-duty pick-and-place systems. During stationary pulls the assembly resists up to 50 N/mm², limiting conductor elongation when locked in cable trays. These properties keep power delivery stable and feedback error-free across long travel paths and fast indexing moves.
