ZK4501-8022-0010 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
28 Seconds
The Beckhoff ZK4501-8022-0010 is a 1.00 meter motor cable from the ZK Motor Cables series. It has a maximum operating voltage of 1000 V AC and a rated current of 14 A for the power circuit. The cable features IP66/67 protection, a bayonet locking method, and is designed for up to 5 million cycles.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Beckhoff designs the ZK4501-8022-0010 as part of its ZK Motor Cables series for connecting IP-rated servo motors to matching drive amplifiers in automated production cells. The hybrid construction carries three-phase power, brake supply, and feedback conductors in one sheath, reducing panel wiring and installation time. By maintaining EMC compliance and mechanical flexibility, the cable ensures that motion axes receive stable energy and control signals during repetitive positioning, packaging, or material-handling duties.
The cable is supplied in a fixed 1.00 m length, suitable for short interconnections inside compact control cabinets. Its power cores use a cross-section of 1.00 mm², while the dedicated brake pair is sized at 0.75 mm² to match the lower current demands of electromechanical holding brakes. Continuous load capability on the power conductors reaches 14 A, and insulation is rated for 630 V AC/DC so that standard drive outputs can be routed without derating. Environmental protection is supported by an IP66/67 sealing level; molded connectors and gaskets prevent dust ingress and allow temporary immersion. A bayonet locking system secures the plug to the motor housing, providing tool-free engagement during service.
Signal conductors inside the hybrid assembly are sized at AWG22 and are rated for up to 3.6 A, with a peak voltage of 63 V AC/DC. Dielectric strength is verified to impulse withstand levels of 6.0 kV on the power cores and 1.5 kV on the signal pair, protecting electronics against switching transients. The outer jacket remains flexible up to a traverse velocity of 4 m/s and survives 5 million drag-chain strokes after the initial 500 mating operations at the connector. Overall insulation supports a maximum operating voltage of 1000 V AC, giving headroom for regenerative drive events without stressing the cable dielectric.
