ZK4500-8022-0140 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4500-8022-0140 is a 14 meter long motor cable from the ZK Motor Cables series. It features a conductor layout of 4 x 1 mm², 2 x 0.75 mm², and 2 x AWG22, with a jacket made from TPU and wire insulation of PP. The cable supports a maximum speed of 240 meters per minute, can withstand up to 5 million bending cycles, and handles acceleration up to 30 meters per second squared.
Internal Product Review
The ZK4500-8022-0140 is a Beckhoff motor cable designed for dynamic automation service, with a TPU jacket and PP wire insulation. Copper bare conductors and a 5 million bending-cycle rating support clean electrical performance and excellent flex-life in cable-chain applications. A 30 m/s² acceleration limit stands out as a strong indicator of dependable high-speed machine operation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4500-8022-0140 motor cable is produced by Beckhoff within the ZK Motor Cables series. Designed for moving axes in automated machinery, the cable links a drive controller to a servomotor so that power, brake energy, and encoder or sensor signals are carried together. In industrial automation, this preassembled cable streamlines installation, maintains electromagnetic compatibility, and supports continual flexing inside cable carriers. Its combined power and signal routing also helps keep machine wiring compact around traveling axes.
With a factory length of 14.00 m, the assembly fits medium-stroke gantries while keeping excess slack to a minimum. Four conductors with a 1.00 mm² cross-section deliver the motor phase current, and each bundle must observe the minimum bend radius of 81 mm during routing. Drag-chain suitability is confirmed by a life rating of 5 million bending cycles and a permitted acceleration of 30 m/s². The layout 4 × 1 mm² + 2 × 0.75 mm² + 2 × AWG22 groups power, brake, and signal pairs in one flexible assembly. All cores are bare copper strands insulated in PP, and a wear-resistant TPU outer sheath protects against cutting fluids and tears while keeping flexibility consistent during motion.
The dynamic values extend to a travel speed of 240 m/min over horizontal strokes up to 20 m, letting the cable keep pace with high-cycle pick-and-place units. At the drive end, the cable uses a Power 3 + PE connection with five signal pins, and the motor-side connector follows a pitch of 7.62 mm for direct mating with Beckhoff servo interfaces. Two brake lines of 0.75 mm² and separate AWG22 signal pairs help limit voltage drop and reduce feedback noise during repeated motion. The mass of 215 kg/km helps determine carrier load and counterbalance requirements for moving cable systems.
