ZK4500-8003-0200 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The ZK4500-8003-0200 is a motor cable from Beckhoff and is part of the ZK Motor Cables series. It features a length of 20 meters, has a maximum operating voltage of 1000 V AC, and uses copper bare conductor material. This cable has a power cross-section of 1.50 mm², brake cross-section of 0.75 mm², and signal cross-section of AWG22, with a PVC jacket and PP insulation.
Internal Product Review
The ZK4500-8003-0200 is a Beckhoff motor cable that impresses with bare copper conductors and a durable PVC jacket. The M23 head A and Power 3+PE plus Signal 5 arrangement support clean, dependable motor-side connectivity in servo applications. A 1000 V AC operating rating stands out as a strong specification for demanding industrial cable runs.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4500-8003-0200 is a motor supply and feedback cable produced by Beckhoff for the ZK Motor Cables series. It connects a drive controller to a servo motor so power, brake current, and incremental feedback signals can travel through a single cable run to the machine axis. By matching the plug sizes and electrical pinouts used in Beckhoff drive systems, the assembly supports straightforward integration in industrial automation panels and moving cable-chain installations.
The cable’s power cores have a cross-section of 1.50 mm², which provides suitable current capacity for typical medium-frame motors. The dedicated brake pair uses 0.75 mm² conductors, allowing brake release current to be carried without adding unnecessary bulk to the cable. A maximum continuous phase-to-phase voltage of 1000 V AC allows the assembly to be used with high-voltage inverters. At the motor end, a circular plug with an M23 shell contains Power 3+PE and Signal 5 contacts, and the finished harness is supplied in a factory-cut length of 20.00 m. The opposite end uses a 7.62 mm pitch board connector with four power pins, while a separate 3.50 mm pitch header provides five signal pins for encoder feedback. Signal conductors use AWG22, and the minimum bending radius is five times the outer diameter for reliable motion in drag-chain applications.
Current-carrying paths use bare copper strands to reduce resistive loss during operation. A dynamic tensile rating of 20 N/mm² indicates the allowable pulling load while the cable is in motion. Each conductor is insulated with PP for dielectric strength, and the outer jacket is made of flame-retardant PVC that resists the coolants and lubricants commonly found in machinery. Head A has Power 3+PE and Signal 5 positions, head D uses a 5-pin layout, and the 4-pin head B carries the remaining phases.
