ZK4500-8003-0100 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4500-8003-0100 is a motor cable from the ZK Motor Cables series, with a cable length of 10 meters and a core configuration consisting of 4 x 1.5 mm², 2 x 0.75 mm², and 2 x AWG22. It features a PVC jacket, bare copper conductor material, and supports an operating voltage of 1000 V AC. The cable has a minimum bending radius of 61 mm, an insulation resistance of at least 500 megaohms per kilometer, and offers 85% or greater shield coverage.
Internal Product Review
The ZK4500-8003-0100 is a Beckhoff motor cable with bare copper conductors and a PVC jacket, giving the assembly a strong balance of conductivity and service durability. A 1000 V AC operating voltage and at least 85% shield coverage support dependable power transmission and effective noise control in motion applications. High insulation resistance of at least 500 MΩ·km is a standout advantage for stable industrial motor connections.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4500-8003-0100 motor cable is manufactured by Beckhoff within the ZK Motor Cables series. Intended for servo installations, the assembly combines power, brake, and signal conductors so a drive controller can deliver phase current and receive feedback from a motor. Its role in industrial automation is to simplify wiring between cabinet hardware and moving axes while maintaining the electrical integrity required for closed-loop motion control. By grouping these functions in one cable, it reduces the need for separate runs through drag chains and other moving machine sections.
The four power cores each carry 1.50 mm² of copper, supporting continuous phase service at up to 1000 V AC without overheating. Two dedicated brake leads sized at 0.75 mm² supply release current, and two twisted pairs with a conductor rating of AWG22 handle encoder data. Power-side mutual capacitance is limited to 90 pF/m, helping drives maintain accurate current regulation over the run. Bare-copper conductors sit in polypropylene insulation that offers insulation resistance of at least 500 MΩ·km, and an overall shield with at least 85% coverage reduces electromagnetic emissions. The combined core set is enclosed in a PVC jacket for general-purpose machine environments.
At a factory-cut length of 10.00 m, the cable reaches between moving carriages and fixed cabinets without joints. That continuous length avoids intermediate connectors that could add bulk in moving cable tracks. Installation is eased by a minimum bending radius of 61 mm, allowing routing through energy chains. The sheath tolerates a static tensile load of 50 N/mm², preventing conductor stretch when runs are fastened overhead. A gray outer diameter of 12.2 mm encloses the PP-insulated bundle and provides abrasion resistance during continuous motion. The assembly is not halogen-free, so corrosive gas formation must be considered where fire regulations demand low-smoke materials.
