ZK4500-0023-0090 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4500-0023-0090 is a motor cable from the ZK Motor Cables series, featuring a length of 9 meters and a core configuration of 4x1.5 plus 2x(2x0.75) mm². This cable has a PUR jacket, an outer diameter of 12.4 mm, and is rated for voltages up to 600/1000 V. It supports a maximum speed of 4 meters per second and can be used for up to 10 million cycles.
Internal Product Review
The ZK4500-0023-0090 is a Beckhoff motor cable with a PUR jacket and a 600/1000 V rating. For motion-intensive service, this cable supports up to 10 million cycles and 30 m/s² acceleration, making it a strong choice for demanding cable track applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Beckhoff's ZK4500-0023-0090 is a pre-assembled motor supply and feedback cable from the ZK Motor Cables series. This hybrid assembly routes power conductors and sensor pairs between an AX series servo drive and a synchronous motor in automated machinery. By combining phase power and feedback circuits in one jacket, the cable simplifies installation and keeps motor and encoder connections grouped along the same moving path.
The assembly is supplied in a length of 9.00 m, allowing controller-to-motor runs inside long machine frames. Its conductor set uses four 1.5 mm² power cores plus two paired 0.75 mm² feedback circuits, and each copper strand is insulated with PP to reduce dielectric losses during signal transmission. A tough PUR outer sheath provides abrasion and coolant resistance while keeping the overall diameter to 12.4 mm for routing through carriers and machine openings. In continuously moving cable chains, the jacket withstands peak accelerations up to 30 m/s² and survives more than 10 million double-strokes without conductor fatigue. Insulation resistance is 10 MΩ·km, and the design meets a voltage utilization of 600/1000 V for combined power and signal service. The molded connector on head B maintains a 7.62 mm pitch between signal pins to reduce crosstalk.
In drag-chain service, the minimum dynamic bend radius is limited to 7 × outer diameter. When permanently laid, the cable may be bent to 4 × outer diameter without compromising shield integrity. The circular power end features an M23 plug that locks to standard Beckhoff motor sockets, while the encoder side uses a 3.50 mm contact pitch to fit drive feedback modules. Continuous motion is supported at speeds up to 4 m/s across strokes as long as 20 m, matching pick-and-place axes or pallet shuttles that need fast and repeatable cable movement.
