ZK4500-0004-0150 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4500-0004-0150 is part of the ZK Motor Cables series and features a cable length of 15 meters with a bare copper conductor. It is rated for 1000 V AC operating voltage and has a head A with Speedtec locking, M23 size, 8-pin configuration, and IP66/67 protection. The cable uses a PVC jacket, PP wire insulation, and supports a rated current of 30 Amps at head A.
Internal Product Review
The ZK4500-0004-0150 is a Beckhoff motor cable with an M23 8-pin connector that supports clean, secure motor interfacing. Speedtec locking and IP66/67 protection make installation efficient and service performance dependable in demanding equipment layouts. A 1000 V AC operating voltage highlights the cable’s strong electrical capability.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4500-0004-0150 is a motor power and feedback cable produced by Beckhoff in the ZK Motor Cables series. Designed to link a servo drive with a motor and integral brake, the assembly routes power conductors, brake wires, and signal pairs within one jacket for streamlined installation in automated machinery. It serves as a pre-assembled wiring solution that accelerates commissioning and reduces wiring errors in industrial motion systems.
At a cable length of 15.00 m, the assembly can span routing paths between cabinet and machine frame without intermediate joints. The molded plug on Head A is rated for 30 A, supporting continuous phase current for medium-frame servomotors, while the same connector’s ingress seal fulfills IP66/67 so wash-down or dusty cells do not compromise contacts. The mechanical interface follows the M23 profile and employs Speedtec locking for quarter-turn mating that maintains vibration resistance. Power cores use a 2.50 mm² cross-section to limit voltage drop at the specified load, and a separate 1.00 mm² pair ties into the motor’s brake coil.
The signal pair sized 1.00 mm² carries encoder reference potentials, backed by an insulation resistance of 10 MΩ·km to minimize leakage over the full run. Overall operating voltage capability reaches 1000 V AC, and every conductor withstands a type-tested impulse of 4000 V wire-to-wire for transient immunity; supplementary tests verify 2000 V between wire and shield. Bare copper strands inside PP insulation and a PVC outer jacket provide flexibility and resistance to industrial coolants. The 8-pin arrangement in the plug simplifies wiring because dedicated contacts exist for brake lines with a 1.00 mm² cross-section identical to the control pair. These characteristics enable reliable motion control connections in robots, packaging lines, and material-handling axes.
