ZK4500-0003-0100 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4500-0003-0100 is part of the ZK Motor Cables series and has a cable length of 10 meters with an outer diameter of 11.7 mm. It features copper bare conductor material, an insulation of PP, and a PVC jacket. The cable operates at up to 1000 V AC and supports an 8-pin M23 connector layout with a conductor configuration of 4x1.5 plus 2x(2x0.75) mm².
Internal Product Review
The ZK4500-0003-0100 is a Beckhoff motor cable built for dependable servo power and signal connectivity, using bare copper conductors and a PVC jacket. An M23 8-pin connection at Head A supports secure interfacing for motor assemblies. The 1000 V AC maximum operating voltage and 4000 V test voltage stand out as strong indicators of insulation integrity and industrial readiness.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4500-0003-0100 cable is manufactured by Beckhoff and belongs to the ZK Motor Cables series. It is supplied as a ready-to-install assembly that carries drive power, brake supply, and encoder signals between servo amplifiers and synchronous motors in automated machinery. By combining several conductor groups inside one jacket, the cable supports clean routing between the cabinet and the motor while reducing the number of separate leads that have to be managed along the axis. This arrangement is useful on servo axes where motion, braking, and feedback circuits must reach the motor through a single flexible connection.
The cable has an overall length of 10 m, which supports direct routing from the control cabinet to the motor without intermediate junctions. Its conductor layout is 4x1.5 + 2x(2x0.75) mm², separating motor power, brake wiring, and feedback circuits within the same assembly. The maximum operating voltage is 1000 V AC, and the molded PVC outer jacket has a diameter of 11.7 mm for straightforward passage through cable guides and drag-chain separators. Polypropylene insulation around the bare copper strands helps maintain electrical separation, and the grouped construction keeps power and signal paths organized without requiring separate cable runs.
The cable withstands a dielectric test voltage of 4000 V, which verifies insulation integrity. On the motor side, the molded plug uses an M23 interface with an 8-pin insert, while the drive side terminates on a terminal block with a 7.62 mm pitch; internal board jumpers are arranged on a 3.50 mm pitch for compact assembly. The finished cable weighs 224 kg/km, which is useful for drag-chain loading calculations, and the PVC jacket provides resistance to common coolants used around machine tools and automated equipment.
