ZK4000-2610-2030 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4000-2610-2030 is part of the ZK Motor Cables series and has a conductor size of 8 x 2 x 0.14 mm². It features a PUR jacket, operates at 300 V, and is equipped with a 17-pole round connector on one end and a D-Sub 15 connector on the other. The cable supports a maximum acceleration of 4 m/s², 10 million bending cycles, and uses a tinned copper braid with at least 85% shielding coverage.
Internal Product Review
The ZK4000-2610-2030 is a Beckhoff motor cable configured with a 17-pole round connector and a D-Sub 15 termination. A PUR jacket and 300 V operating rating give the cable a durable, application-ready build for machine wiring. Tinned copper braid shielding with at least 85% coverage is a standout feature for maintaining signal quality.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4000-2610-2030 motor cable is produced by Beckhoff as part of the ZK Motor Cables series. It is supplied as a factory-terminated assembly that links an AX or EL drive module to its matching servomotor and encoder during operation. By combining power, sensor, and shielded conductors inside one flexible jacket, the product reduces cabinet wiring and supports coordinated motion in packaging, pick-and-place, and gantry axes. Its dimensions and connector layout match Beckhoff motor interfaces, so it can be routed through drag-chain carriers without field crimping.
Eight twisted signal pairs form the core, arranged in 8 × 2 × 0.14 mm² topology that balances copper cross-section with a low overall diameter. A 17-pole round plug mates with Beckhoff amplifiers, and the motor end uses a D-Sub 15 hood for feedback and power connections. The outer sheath is made of PUR, providing abrasion resistance during repetitive motion. The cable is rated for a maximum acceleration of 4 m/s² and a peak travel speed of 120 m/min in cable-track applications. Mechanical fatigue life reaches 10 million bending cycles when the cable is guided within its specified minimum loop diameter of 75 mm, which supports repeated motion without conductor fracture or signal interruption.
Electrically, capacitance is limited to 120 pF/m, helping the drive maintain encoder edge integrity over long runs. A braided screen of tinned copper encloses the core bundle with at least 85% coverage, supporting uniform impedance and effective EMI suppression. Insulation integrity is verified by a minimum resistance of 5000 MΩ×km and a withstand test of 1.5 kV, while continuous operation is rated for 300 V systems typical of Beckhoff low-voltage servos. The assembly weighs 69 kg/km, which is relevant for drag-chain load calculations in moving cable systems.
