ZK4000-2210-2150 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK4000-2210-2150 is part of the ZK Motor Cables series and features a 4 x 2 x 0.25 mm² conductor cross-section and a PUR sheath material. This cable supports a maximum velocity of 120 meters per minute, has a minimum bending radius of 75 mm, and operates at 300 volts. It offers an insulation resistance of 5000 megaohms per kilometer and shield coverage of 85%.
Internal Product Review
The Beckhoff ZK4000-2210-2150 is a well-engineered motor cable with a PUR sheath and 300 V operating voltage. The D-Sub 9-Pole drive connector and 12-Pole Round motor connector support clean integration in servo wiring layouts. An 85% shield coverage and 10 Million max cycle count make the cable an excellent choice for dependable motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK4000-2210-2150 is a flexible motor supply lead produced by Beckhoff and assigned to the ZK Motor Cables series. Designed for dynamic routing between a servo drive and a rotary motor, the cable carries power and feedback signals in automated machinery. Its geometry and materials are selected to maintain signal integrity, mechanical endurance, and electromagnetic shielding in continuously moving cable chains that characterize many Beckhoff motion systems. It serves as a plug-and-play component for modular control cabinets, matching the pinouts of standard AX servo amplifiers.
The cable is rated for an operating voltage of 300 V, and its polypropylene insulation provides an insulation resistance of 5,000 MΩ × km, which helps limit leakage current over long runs. A mutual capacitance of 120 pF/m helps keep reactive charging current low, which is important for precise current control at high PWM frequencies. The conductor set is arranged as 4 x 2 x 0.25 mm²; this paired and twisted layout separates power and sensor lines to reduce crosstalk. Aluminum-laminate braids provide 85% shield coverage, attenuating radiated emissions and protecting encoder feedback against external noise. For proof testing, each finished length withstands an AC test potential of 1.5 kV eff. without dielectric breakdown.
The cable has a life rating of 10 million flex cycles when installed in drag-chain applications. During rapid indexing, the jacket tolerates accelerations up to 4 m/s² and linear speeds of 120 m/min, provided the installation maintains a minimum bending radius of 75 mm. A PUR outer sheath resists cutting oils and abrasion, while the overall diameter is limited to 7.5 mm to ease routing through tight ducts. The cable mass is 80 kg/km, so tension loads stay low even over long horizontal travel. One end terminates in a D-Sub 9-pole drive connector, and the opposite end carries a 12-pole round motor plug, allowing quick exchange without field crimping.
