ZK2030-1114-0030 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK2030-1114-0030 is part of the ZK Motor Cables series and features a 3 meter length with a cross-section of 5 x 1.5 mm². This cable has an A-Coded plug on one end and a flange front assembly with wires on the other, with a 5-pin configuration and a PUR jacket. It is rated for 300 V and 12 A at 40°C, offers IP65/67 protection when screwed, and supports a maximum acceleration of 10 m/s².
Internal Product Review
The ZK2030-1114-0030 is a Beckhoff motor cable with a PUR jacket and IP65/67 protection when screwed. A 300 V rating and 12 A capacity at 40°C support dependable motor-side power delivery in machine wiring. A strong choice for clean, secure cable integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK2030-1114-0030 is a pre-assembled motor supply cable manufactured by Beckhoff within the ZK Motor Cables series. In automated systems, it forms the fixed power path between a drive controller and a servomotor, delivering phase current while helping keep contaminants out of the connection points. Its molded connectors support fast hookup on modular production lines and keep cable routing straightforward in compact machine layouts.
This lead is supplied in a length of 3.00 m, allowing short-run cabinet-to-motor routing without excess slack. Power conductors use a cross-section of 5 × 1.5 mm²; five cores carry three phases plus protective and reference lines, and the 1.5 mm² copper area limits resistive loss over the stated distance. Under 40 °C ambient conditions, the assembly carries a continuous load of 12 A, matching the current range of many Beckhoff drive controllers. Insulation clearance supports a line potential of 300 V, so the cable fits low-voltage drive systems. When both connectors are fully threaded, the mating interface reaches a sealing class of IP65/67, which helps prevent dust ingress and water entry at the connection points.
Dynamic applications such as gantry axes are accommodated by a permissible acceleration of 10 m/s², and chain routing is simplified because the cable may flex down to a radius of 6 × outer cable diameter during motion. The outer jacket is made of PUR, which resists hydraulic oil and welding spatter while maintaining flexibility after prolonged cycles. Transient overvoltages are tolerated up to 2.5 kV through the insulation system. An A-coded 7/8-inch-16 UN plug terminates Head A, while Head B uses a flange-front assembly with pre-stripped wires; together with the 5-pin layout and a conductor bundle of 84 × 0.15 mm strands, this arrangement supports quick installation in cabinets that do not require cable shielding.
