ZK2020-3334-0010 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK2020-3334-0010 is a motor cable from the ZK Motor Cables series with a PUR jacket and a length of 1 meter. It features an M8 angled plug to M8 angled socket configuration, 4-pin A-coded contact arrangement, and supports rated currents up to 4 Amps at 40 degrees Celsius. The cable has a protection rating of IP65/67 and operates at up to 50 V AC or 60 V DC.
Internal Product Review
The ZK2020-3334-0010 is a Beckhoff motor cable with an M8 angled plug to M8 angled socket configuration and a 4-pin A-coded contact arrangement. PUR jacket construction and IP65/67 protection make the cable especially well suited for machine-level motion applications. Rated for 4 A at 40°C and 50 V AC/60 V DC, the cable stands out as a dependable interconnect for demanding industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK2020-3334-0010 motor cable is produced by Beckhoff within the ZK Motor Cables series. Designed for linking compact servo drives to decentralized I/O or motion controllers, the assembly provides power and signal continuity in mobile machine axes and fast pick-and-place stations. Its molded connectors, flexible conductor design, and polyurethane jacket allow repeated dynamic movement while maintaining ingress protection and consistent electrical parameters in automated production cells.
The cable length is 1.00 m, a compact run for short motor-to-module jumps that minimizes loop slack inside cable chains. Four conductors with a cross-section of 4 x 0.34 mm² support power and feedback demands while keeping the outer diameter at 4.7 mm ± 0.15 mm. Termination uses a M8 angled plug to M8 angled socket arrangement, simplifying daisy-chain layouts where right-angle exits avoid collision with adjacent wiring. The cable is rated for 50 V AC/60 V DC and can carry up to 4 A at 40 °C, which aligns with the current draw of Beckhoff micro-servo stages. The PUR jacket resists oils and welding spatter, and the connectors are rated for at least 100 mating cycles without mechanical degradation. A minimum bend radius of ten times the outer diameter safeguards conductor integrity during constant flexing, while wire resistance stays below 58 Ω/km at 20 °C to limit voltage drop over the one-meter path.
For dynamic routing, the assembly tolerates linear travel speeds up to 5 m/s and accelerations of 10 m/s², letting gantry axes achieve swift positioning without stressing the conductors. Environmental sealing reaches IP65/67, so dust and water exposure do not compromise operation in washdown zones. Although no overall shield is present, the short length and low capacitance help reduce conducted noise, and the dielectric withstand of ≥ 3000 V provides margin for insulation testing.
