ZK2020-3132-0010 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The ZK2020-3132-0010 is a motor cable manufactured by Beckhoff, part of the ZK Motor Cables series. This cable features 4-pin connectors in an M8 straight plug to M8 straight socket configuration, with a cable length of 1 meter. It is constructed with PUR jacket material, supports rated currents up to 4 A at 40°C, and offers IP65/67 protection.
Internal Product Review
The ZK2020-3132-0010 is a Beckhoff motor cable with a straight M8 plug-to-M8 socket configuration and durable PUR construction. IP65/67 protection and a 4 A current rating at 40°C support stable service in demanding machine connections. Clean signal interfacing and solid build quality make this cable a strong choice for dependable motor connectivity.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK2020-3132-0010 is a motor connection cable produced by Beckhoff as part of the ZK Motor Cables series. It serves as a ready-to-install link between servo drives and small motors or decentralized field devices, using an M8 plug on one end and an M8 socket on the other to carry both power and signal lines through a single assembly. The product supports quick, repeatable wiring in automation layouts where space is limited and connector standardization helps reduce setup time.
The four conductors have a cross section of 4 x 0.34 mm² (AWG22), and each core consists of 42 strands of 0.10 mm wire to improve flexibility during continuous machine motion. A tough PUR sheath protects the bundle against oil, coolant, and abrasion, while its outer diameter of 4.7 mm ± 0.15 mm allows tight cable routing through drag chains or sensor tracks. The interface uses A-coded keying, which supports compatibility with standard M8 automation hardware and helps prevent polarity errors. With a rated load of 4 A at 40 °C, the cable can supply low-power motors or sensor blocks without exceeding thermal limits. The assembly is unshielded, so it is intended for environments where electromagnetic interference is already controlled or is not critical. A recommended connector torque of 0.4 Nm secures the metal thread without overstressing the coupling nut.
The predefined length of 1.00 m simplifies layout planning and minimizes excess slack inside control cabinets. The cable has a nominal rating of 50 V AC/60 V DC and a dielectric test level of ≥ 3000 V, providing clear separation between normal operating voltage and insulation test voltage. The mated interface has an IP65/67 rating that helps keep dust and splashing fluids out during operation. The four-pin contact system withstands at least 100 coupling cycles before wear becomes significant, and wire resistance remains at or below 58 Ω/km at 20 °C to help limit voltage drop over short runs. The absence of shielding also reduces cable weight for dynamic machine axes.
