ZK2000-6100-0030 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK2000-6100-0030 is part of the ZK Motor Cables series and features a 4-pin M12 male straight plug on one end with an open end on the other. The cable has a PUR jacket, a cross-section of 4 x 0.34 mm², and is 3 meters long. It supports a rated current of 4 Amps at 40 degrees Celsius and a rated voltage of 250 Volts.
Internal Product Review
The ZK2000-6100-0030 is a Beckhoff motor cable with an A-coded 4-pin M12 male straight plug that supports clean, secure connection points. PUR jacketing and PP wire insulation give the assembly a durable, application-ready build for continuous industrial service. A 250 V rating and 1.5 kV impulse voltage highlight the cable’s solid electrical performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK2000-6100-0030 motor cable is manufactured by Beckhoff within the ZK Motor Cables series. Designed for servo and stepper installations, the cable delivers power between a drive amplifier and its corresponding motor while maintaining reliable performance in automated machinery. With a molded M12 plug on one end and open conductors on the other, it can be routed through cable chains and control cabinets as a preassembled solution that reduces wiring effort during machine assembly. It is intended for dynamic motion applications that require compact connectors and a chemical-resistant outer jacket.
The conductors use a cross-section of 4 x 0.34 mm² (AWG 22), providing enough copper for low-loss power delivery to small motors. The overall diameter measures 4.7 mm ± 0.15 mm, so the cable fits tight bends inside drag chains without overstressing the insulation. The molded connector uses an A-coded interface, and the connector shell follows the M12 size designation for quick locking in field devices. Under 40 °C ambient conditions, each conductor carries up to 4 A at 40 °C, which covers the typical current demand of compact rotary axes. The PUR outer jacket resists cutting oils, and the polypropylene wire insulation maintains dielectric strength during repetitive flexing. The second end is supplied as an open end for direct terminal block or drive clamp termination, allowing flexible cabinet integration.
During motion, the cable tolerates accelerations up to 10 m/s² and linear travel speeds up to 5 m/s, supporting rapid pick-and-place sequences. Its insulation system supports a surge withstand of 1.5 kV along with a continuous working potential of 250 V. For reliable mating, the coupling nut on the plug is tightened to 0.6 Nm, which helps prevent loosening under cyclical machine vibration. The fixed 3.00 m length simplifies routing, and the PUR sheath keeps the assembly flexible during repeated cycles in energy-chain-guided runs.
